Surface Protective Materials E-MASK® RB-S Series

Surface protective materials with an antistatic properties that are ideal for applications that do not tolerate static electricity such as LCD panels.

E-MASK RB-S Series of surface protective materials developed for optical films such as LCD polarizing film prevents static electricity produced. Offers stable adhesion and easy peeling.

Contact Us

Customer Support Center

Business Hours(India time)08:30-17:00

Except for Second Sat of each month, Sun, and Holidays

E-mail

Features
Properties
Applications
Precautions

Features

It has good initial lamination level and light peeling force.
Minimal change in adhesive strength following application ensures easy peeling.
Offers superior dustproofness when unwinding.

Properties

Item	Thickness [mm] *1	Adhesive strength [N/20mm] *2
E-MASK® RB-100S	0.045	0.05
E-MASK® RB-200S	0.045	0.15
E-MASK® RB-300S	0.050	0.35

[Test method]

*1: Nominal thickness
*2: Adherent: Acrylic plate

Applications

Surface protective for optical films such as polarizing films. (during LCD shipping)
Applications that do not permit attraction of dust and dirt due to static electricity produced when applying or peeling the tape.

Precautions

Avoid sunlight and store at room temperature and moderate humidity.
Do not press too strong when applying. This may cause the end of the tape to peel.
If applying to surfaces treated with machining oil, degrease the surface carefully. Any remains will be a cause for surface contamination or adhesive residue.
For use under severe conditions, please test and evaluate the product thoroughly beforehand.
Painting, plating, etching, or gluing the surface after peeling the tape may be troublesome due to the small amount of residue of the adhesive. Please inspect under actual situations thoroughly before application.
Painted boards, depending on conditions such as paint baking, may cause the tape to peel uneasily or peel off the paint together. Please evaluate thoroughly beforehand.
Surface treated boards such as alumite, depending on treatment conditions, may show different properties (peeling) of SPV. Please evaluate thoroughly beforehand.
Especially for applications against natural substrate (marble stone, lumber, etc) please contact our sales representative in charge.

The above datasheet is a sample observation value under certain testing conditions, not guaranteed performance.
The quality, performance, and/or functions of this product will differ according to the conditions of use. Please contact our department in charge for full details of this product.
Under severe conditions, this product may show difference between the sample observed values and the actual performance. Please test and evaluate the product thoroughly for your safety and better results.
This product and/or its features may change or be discontinued without any prior notice.
The intellectual property rights of this document belongs to Nitto Denko Corporation. Please contact our department in charge for usage not in accordance of the intended use. Copying and/or reproducing the document without notice are strictly prohibited. All rights reserved.