• Minimal change in adhesive strength after laminating enables easy peeling.
• The transparency allows appearance inspection of the surface condition of the substrate after processes like bending and CO2 laser cutting.
• Strong adhesive type suitable for protection of rough colored metal or CO2 cutting process.
• Acceptable use on stainless steel up to 16 gauge.

[Test method]

• *1: Nominal thickness
• *2: Adherend: SUS430BA, Tensile speed：300mm/min(12inch/min), Peeling angle:90°
• *3: Tensile speed 300mm/min(12inch/min), strength and elongation when breaking.

• Surface protection for colored steel plates during process and transportation.
• CO2 laser cutting process for stainless steel (not for use with Fiber lasers)

• Avoid sunlight and store at room temperature and moderate humidity.
• Do not press too strong when applying. This may cause the end of the tape to peel.
• If applying to surfaces treated with machining oil, degrease the surface carefully. Any remains will be a cause for surface contamination or adhesive residue.
• For use under severe conditions, please test and evaluate the product thoroughly beforehand.
• Painting, plating, etching, or gluing the surface after peeling the tape may be troublesome due to the small amount of residue of the adhesive. Please inspect under actual situations thoroughly before application.
• Painted boards, depending on conditions such as paint baking, may cause the tape to peel uneasily or peel off the paint together. Please evaluate thoroughly beforehand.
• Surface treated boards such as alumite, depending on treatment conditions, may show different properties (peeling) of SPV. Please evaluate thoroughly beforehand.
• Especially for applications against natural substrate (marble stone, lumber, etc.) please contact our sales representative in charge.
• Painting after peeling off SPV-C-600 could cause repellency of the paint or insufficient paint adhesion.
• When you paint after peeling off the surface protective material, be sure to check the surface washing, pretreatment, or paint baking conditions to ensure the paint adhesion before usage.

• The above datasheet is a sample observation value under certain testing conditions, not guaranteed performance.
• The quality, performance, and/or functions of this product will differ according to the conditions of use. Please contact our department in charge for full details of this product.
• Under severe conditions, this product may show difference between the sample observed values and the actual performance. Please test and evaluate the product thoroughly for your safety and better results.
• This product and/or its features may change or be discontinued without any prior notice.
• The intellectual property rights of this document belongs to Nitto Denko Corporation. Please contact our department in charge for usage not in accordance of the intended use. Copying and/or reproducing the document without notice are strictly prohibited. All rights reserved.