16 MIL POLYURETHANE MOISTURE BARRIER TAPE 11611-MB

Makes the maintenance process easier

11611-MB is a 16 mil polyurethane moisture barrier tape, with 2 mil adhesive, for floor panels of air and rotary craft. It is both highly flame retardant and extremely resistant to a variety of liquids.

Download

Teknik özellik İndirme

SDS

Teknik özellik İndirme

NA_11611-MB_032023_EN

SDS

The information contained herein is based on all the documentation, information and data that can be obtained as of the date issued.

However, Nitto Denko Co., provides no warranties or guarantees, express or implied, regarding the accuracy or completeness of the information on contained amount, physical or/and chemical properties, and hazards or/and harm mentioned herein.

As for SDS of products categorized as "Article", Nitto Denko Co., voluntarily creates and releases the SDS for the particular products which frequently receive inquiries.

SDS_NJ_Polyurethane_Moisture_Barrier_11611-MB_EN

Features
Application
Precaution

Features

Passes FAR 25.853 burn test
Highly puncture and tear resistant for increased effectiveness of the moisture barrier
Low water vapor transmission rate
High elongation makes it more forgiving in active workplaces
Designed with a single release liner that creates less waste and reduces handling time
Excellent workability allows for easing repositioning and application over irregular shapes and gaps
REACH and RoHS compliant (see Precaution tab)

Your browser does not support iframes

Application

A two-part application, 11611-MB first applies to the floor panel seams, then is applied to the whole floor panel to help prevent the passing of moisture.

Precaution

Best stored between 50°F-80ºF / 10°C-27ºC, 25-50% relative humidity; out of direct sunlight.
Surface should be clean, free of oil, moisture and dirt before applying.
Pressure-sensitive adhesive tapes may require pressure by roller, hand or press when applying. Not doing so may affect the general properties and appearance.
Please inspect your surface prior to application; this tape may not adhere well to extremely uneven or distorted surfaces.
Please remember to allow adequate time for full adhesive strength.
Nitto works to ensure that 11611-MB is REACH compliant. REACH compliance lists are updated every six months, so please contact us directly to ensure that the product you are interested in meets the latest REACH regulations.

Back to product category list Back to product detail list