This product does not use any organic solvents (toluene, xylene, ethyl acetate, etc.)
A double sided tape featuring low VOC emissions.
This product has cleared VOC14 substance guideline value as set by the Ministry of Health, Labor and Welfare.
Uses nonwoven fabric for good substrate familiarity and adherence.
Ideal for adhesion to foam, nonwoven fabric, and plastic materials.
Does not contain RoHS 6 restricted substances.
VOC emission measurement - JIS A 1901 small chamber method
(o.m.p -) Xylene
ND = not detected (or under the measurement limit)
* The level of EW-514 VOC emission is less than the Ministry of Health, Labor and Welfare's measurement standards for indoor concentration.
For fixing sound absorption materials to automobile interior materials.
For fixing to plastic display boards, urethane foam bodies, etc.
For fixing cushioning materials to household appliances and office automation equipment - Adhesion to film and paper.
Make sure to remove any oils, moisture, dust, etc. from the substrate.
As this is a pressure-sensitive adhesive, make sure to thoroughly use a roller or press for crimping. If crimping is not performed thoroughly enough, its properties and external view may be negatively affected.
Clean adhesion may not occur if a surface is highly irregular or warped. Smooth it out as much as possible.
It takes a little time for the tape's original adhesive strength to take full effect, so avoid placing or using the tape in a situation in which a lot of strength is needed until several hours have passed from the time of attachment.
Make sure to store this product in a box.
Avoid storing in high-temperature or high-moisture areas. This product should be stored in a cool, dark area away from direct sunlight (at a temperature of no more than 25℃).
Please use this tape within 6 months of storage.
Take a careful consideration if this product is adapted to the use, purpose and condition before using. The tape may peel in some cases depending on substrate and attachment conditions.
When using this product in areas that may pose a risk of accident, use together with a different joining method.
Long-selling general purpose double-coated adhesive tape. Nitto Denko's most popular double-coated adhesive tape for multiple use consists of flexible nonwoven fabric carrier with pressure-sensitive adhesive. Superior adhesive strength makes the tape ideal for general bonding.
Multipurpose double-coated adhesive tape. No.5015 double-coated adhesive tape consists of flexible nonwoven fabric carrier with pressure sensitive adhesive. The tape adheres strongly to metal, plastic, etc., and has particularly good in repulsion resistance characteristics.
Double-adhesive tape for general purposes. No.501F is a double-coated adhesive tape with a flexible nonwoven base material and acrylic adhesive, and is widely used for bonding paper, film, and other materials.
Double-coated adhesive tape for temporary fixing of sewing leather. No.501K double-coated adhesive tape consists of flexible nonwoven fabric carrier with pressure-sensitive adhesive. The tape adheres well to rough surfaces like clothes and synthetic leather as well as metal and plastic.
Double-coated adhesive tape for laminating all kinds of foam surfaces. No.501L double-coated adhesive tape using a flexible nonwoven fabric carrier with pressure-sensitive adhesive suitable for laminating processes for all kinds of foam such as ether or ester based urethane foams, is ideal for work involving die-cutting and is easy to process.
Solvent-free double-coated adhesive tape with strong tackness and adheres well to rough surfaces: low VOC emission. No.512 double-coated adhesive tape, focusing on "firm bonding" and "user friendliness", is a tape that adhere?well to rough surfaces such as foams. The tape can be used for a wide range of materials such as plastics and metals.
Thick-type solvent-free double-coated adhesive tape low VOC emission. No.515 is a thick-type double-coated adhesive tape, focusing on “firm bonding” and “user friendliness”, the tape can be used for a wide range of materials such as backup materials for interior fixtures as well as plastics and metals.
No.516 is a double-coated adhesive tape with no organic solvents (such as toluene, xylene, and ethyl acetate). It focuses on "firm bonding" and "user friendliness," and adheres well to curved surfaces. The tape can be used for a wide range of materials such as plastics and metals.
Double-coated adhesive tape for application to silicone rubber. No.5302A double-coated adhesive tape consists of polyester film coated on one side with silicone adhesive and on the other side with acrylic adhesive.
Double-coated adhesive tape for fixing plastic printing plates. No.535A double-coated adhesive tape features different adhesive strength for the front and back of a polyester film carrier, developed for fixing plastic printing plates.
Double-coated adhesive tape with high durability. No.5713 double-coated adhesive tape consists of a thin layer of special polyethylene foam carrier evenly coated with acrylic adhesive on both sides. Developed for fields riring durability over an extended period of time, the tape exhibits superior performance in fixing nameplates, etc.
Double-coated adhesive tape with strong holding properties. No.575 double-coated adhesive tape consists of flexible special foam carrier coated with strong pressure sensitive adhesive on both sides. Exhibits excellent performance in holding objects.
Heat resistant double-coated adhesive tape. No.5919ML is double coated adhesive tape for fixing of (*) FPC and stiffener or FPC and housings. The release liner and adhesive can withstand high temperature (peak at 260 degree c.) of the reflow soldering process.
Double-coated adhesive tape for temporary fixing of construction materials. PF-370 double-coated adhesive tape uses special flexible polyethylene foam as a carrier, coated with weather resistant adhesive on both sides, suitable for temporary fixing of construction materials.
Ultra thin single-coated adhesive tape with matte black color special printed PET film carrier and surface has superior anti-fingerprint. These products facilitate thinner electronic equipment, as tapes thickness are 0.01-0.03mm.