Skip to Main text

Surface Protection Tape with high performance film SPV 6065E7 HP

SPV 6065E7 HP is a surface protection tape suitable to protect high gloss and matt metals during mechanical processes such as deep drawing and profiling.

This product consists of a special tear resistant “High Performance” PO film coated with a pressure sensitive “easy peel” acrylic-based adhesive.
Contact Us

Business Hours (WET) 8:00h-17:00h

Except for Sat, Sun, and Holidays


  • Special “easy-peel” adhesive
  • Zipper effect during peel off
  • Very low unwind
  • Very high adhesion level
  • Very good deformation behaviour
  • High tear resistance in all directions (High Performance PO film)
  • For protection of high gloss and matt surfaces
  • Good humidity resistance
  • Substrate identification and inspection
  • Recyclable


  • Pressure sensitive acrylic-based “easy peel” adhesive
  • Tear resistant “High Performance” blue transparent PO film


Typical Value Test Method
Film type Tear resistant PO film
Adhesive type Acrylic-based
Total thickness 0.060 mm EN 1942
Adhesion on BA steel 300 cN/20 mm EN 1939
Weatherability on BA steel* 25 hours ISO 4892-2
Tensile strength MD** 45 N/20 mm EN 14410
Elongation MD 700% EN 14410
Transport and storage conditions Temperature 15 to 30°C
Relative humidity 40 to 75% RH

* The weatherability is measured on BA steel. Depending on the substrate the weatherability performance can be different.
** MD = Machine Direction
CAUTION: The above are typical values and should not be used in writing specifications.
Details from the test methods are described on the customer product specification.


SPV 6065E7 HP is a surface protection tape suitable to protect high gloss and matt substrates such as aluminium and stainless steel during mechanical processes. The use of this tape makes it possible to process the protected surfaces with a very high adhesion level.

Contact Us

Business Hours (WET) 8:00h-17:00h (Except for Sat, Sun, and Holidays)

Back to Page Top