Skip to Main text

Surface Protection Tape for mechanical deformations of metals SPV 9205

SPV 9205 is a surface protection tape suitable to protect high gloss metals during mechanical processes such as deep drawing and profiling.

This product consists of a blue transparent PE film coated with a pressure sensitive “easy-peel” acrylic-based adhesive.
Contact Us

Business Hours (WET) 8:00h-17:00h

Except for Sat, Sun, and Holidays


  • Special "easy-peel" adhesive
  • Zipper effect during peel off
  • Very low unwind
  • High adhesion level
  • Good deformation behaviour
  • For protection of high gloss surfaces
  • Good humidity resistance
  • Substrate identification and inspection
  • Recyclable


  1. Pressure sensitive acrylic-based "easy peel" adhesive
  2. Blue transparent PE film


Typical Value Test Method
Film type PE film
Adhesive type Acrylic-based
Total thickness 0.060 mm EN 1942
Adhesion on BA steel 200 cN/20 mm EN 1939
Weatherability on BA steel * 25 hours ISO 4892-2
Tensile strength MD ** 25 N/20 mm EN 14410
Elongation MD 250% EN 14410
Transport and storage conditions Temperature 15 to 30 °C
Relative humidity 40 to 75% RH

* The weatherability is measured on BA steel. Depending on the substrate the weatherability performance can be different.
** MD = Machine Direction
CAUTION: The above are typical values and should not be used in writing specifications.
Details from the test methods are described on the customer product specification.


SPV 9205 is a surface protection tape suitable to protect high gloss substrates such as aluminium, copper and stainless steel during mechanical processes. The use of this tape makes it possible to process the protected surfaces with a high adhesion level.

Contact Us

Business Hours (WET) 8:00h-17:00h (Except for Sat, Sun, and Holidays)

Back to Page Top