Skip to Main text

Surface Protective Materials SPV-C Series

Surface protective materials specially developed for colored steel plates.

SPV-C Series is a series of surface protective materials with polyethylene film carriers, developed by our own technology. It's suitable for colored steel plates during transportation and processing.
Contact Us

Customer Support Center

  • TEL 1-800-755-8273

Business Hours (EST) 8:00 a.m.-5:30 p.m.

Except for Sat, Sun, and Holidays


  • Changes in adhesive strength after lamination are extremely small, ensuring easy peeling.
  • Transparency shows surface of the substrate without removing the tape.
  • Depending on the surface roughness and the processing method, the fittest adhesive type can be chosen from this well line-up.


Product No. Thickness*1 Adhesive strength*2
SPV-C-6010 0.060 mm / 2.36 mil 1.30 N/20mm / 5.9 oz/in *3
SPV-C-100 0.70 N/20mm / 3.19 oz/in *2
SPV-C-200 1.40 N/20mm / 6.3 oz/in *2
SPV-C-300 1.80 N/20mm / 8.2 oz/in *2
SPV-C-400 2.00 N/20mm / 9.1 oz/in *2
SPV-C-500 2.50 N/20mm / 11 oz/in *2
SPV-C-600 0.090 mm / 3.54 mil 2.50 N/20mm / 11 oz/in *3


  • * SPV-M-6010EC is a 100m-roll type of SPV-C-6010.

[Test method]

  • *1: Nominal thickness
  • *2: Peeling angle: 90°, Peeling speed: 300mm/min.
  • *3: Peeling angle: 180°, Peeling speed: 300mm/min.


  • Surface protective for colored steel plates during transportation and processing.


  • Avoid sunlight and store at room temperature and moderate humidity.
  • Do not press too strong when applying. This may cause the end of the tape to peel.
  • If applying to surfaces treated with machining oil, degrease the surface carefully. Any remains will be a cause for surface contamination or adhesive residue.
  • For use under severe conditions, please test and evaluate the product thoroughly beforehand.
  • Painting, plating, etching, or gluing the surface after peeling the tape may be troublesome due to the small amount of residue of the adhesive. Please inspect under actual situations thoroughly before application.
  • Painted boards, depending on conditions such as paint baking, may cause the tape to peel uneasily or peel off the paint together. Please evaluate thoroughly beforehand.
  • Surface treated boards such as alumite, depending on treatment conditions, may show different properties (peeling) of SPV. Please evaluate thoroughly beforehand.
  • Especially for applications against natural substrate (marble stone, lumber, etc.) please contact our sales representative in charge.
  • Painting after peeling off SPV-C-600 could cause repellency of the paint or insufficient paint adhesion.
  • When you paint after peeling off the surface protective material, be sure to check the surface washing, pretreatment, or paint baking conditions to ensure the paint adhesion before usage.

  • The above datasheet is a sample observation value under certain testing conditions, not guaranteed performance.
  • The quality, performance, and/or functions of this product will differ according to the conditions of use. Please contact our department in charge for full details of this product.
  • Under severe conditions, this product may show difference between the sample observed values and the actual performance. Please test and evaluate the product thoroughly for your safety and better results.
  • This product and/or its features may change or be discontinued without any prior notice.
  • The intellectual property rights of this document belongs to Nitto Denko Corporation. Please contact our department in charge for usage not in accordance of the intended use. Copying and/or reproducing the document without notice are strictly prohibited. All rights reserved.

Contact Us

Customer Support Center

Business Hours (EST) 8:00 a.m.-5:30 p.m.(Except for Sat, Sun, and Holidays)

  • TEL 1-800-755-8273
Adobe Reader Download

Adobe Reader is required to view PDF files.
If not yet installed, please download it from the Adobe website.

Back to Page Top