This product does not use any organic solvents (toluene, xylene, ethyl acetate, etc.)
A double sided tape featuring low VOC emissions.
This product has cleared VOC14 substance guideline value as set by the Ministry of Health, Labor and Welfare.
Uses nonwoven fabric for good substrate familiarity and adherence.
Ideal for adhesion to foam, nonwoven fabric, and plastic materials.
Does not contain RoHS 6 restricted substances.
VOC emission measurement - JIS A 1901 small chamber method
(o.m.p -) Xylene
ND = not detected (or under the measurement limit)
* The level of EW-514 VOC emission is less than the Ministry of Health, Labor and Welfare's measurement standards for indoor concentration.
For fixing sound absorption materials to automobile interior materials.
For fixing to plastic display boards, urethane foam bodies, etc.
For fixing cushioning materials to household appliances and office automation equipment - Adhesion to film and paper.
Make sure to remove any oils, moisture, dust, etc. from the substrate.
As this is a pressure-sensitive adhesive, make sure to thoroughly use a roller or press for crimping. If crimping is not performed thoroughly enough, its properties and external view may be negatively affected.
Clean adhesion may not occur if a surface is highly irregular or warped. Smooth it out as much as possible.
It takes a little time for the tape's original adhesive strength to take full effect, so avoid placing or using the tape in a situation in which a lot of strength is needed until several hours have passed from the time of attachment.
Make sure to store this product in a box.
Avoid storing in high-temperature or high-moisture areas. This product should be stored in a cool, dark area away from direct sunlight (at a temperature of no more than 25℃/ 77°F).
Please use this tape within 6 months of storage.
Take a careful consideration if this product is adapted to the use, purpose and condition before using. The tape may peel in some cases depending on substrate and attachment conditions.
When using this product in areas that may pose a risk of accident, use together with a different joining method.
Nitto 5005T(P) are transfer tapes which consist out of a pressure sensitive modified acrylic adhesive, intended for use as a general mounting tape where a particular high adhesion level on low surface energy substrates is required.
Nitto 5015T is a transfer tape which consists out of a pressure sensitive modified acrylic adhesive, intended for use as a general mounting tape where a particular high adhesion level on low surface energy substrates is required.
Nitto baseless tape 5025T consists of a pressure sensitive modified acrylic adhesive, intended for use as a general mounting tape where a particular high adhesion level on low surface energy substrates is required.
Nitto 5790 series are double coated foam tapes, based on a cross linked polyolefine foam, coated with pressure sensitive adhesive, having excellent bonding properties, especially on low energy surfaces.
Long-selling general purpose double sided tape. Nitto's most popular double sided tape for multiple use consists of flexible nonwoven fabric carrier with pressure-sensitive adhesive. Superior adhesive strength makes the tape ideal for general bonding.
Multipurpose double sided adhesive tape. No.5015 double sided adhesive tape consists of flexible nonwoven fabric carrier with pressure sensitive adhesive. The tape adheres strongly to metal, plastic, etc., and has particularly good in repulsion resistance characteristics.
Thick-type solvent-free double sided adhesive tape low VOC emission. No.515 is a thick-type double sided adhesive tape, focusing on “firm bonding” and “user friendliness”, the tape can be used for a wide range of materials such as backup materials for interior fixtures as well as plastics and metals.
Double sided adhesive tape for application to silicone rubber. No.5302A double sided adhesive tape consists of polyester film coated on one side with silicone adhesive and on the other side with acrylic adhesive.
Heat resistant double sided adhesive tape. No.5919ML is double coated adhesive tape for fixing of (*) FPC and stiffener or FPC and housings. The release liner and adhesive can withstand high temperature (peak at 260°C/ 500°F.) of the reflow soldering process.
Ultra thin single-coated adhesive tape with matte black color special printed PET film carrier and surface has superior anti-fingerprint. These products facilitate thinner electronic equipment, as tapes thickness are 0.005-0.03 mm (0.19 - 1.18 mil).