Skip to Main text

Surface Protective Materials SPV-301/302

Surface protective materials with excellent process-ability.

SPV-301/302 are surface protective materials for metal plates that use a polyethylene film as a base material. Providing excellent processability . These products prevent scratching of metal plate surfaces during processing and transportation.
Contact Us

Business Hours(Taiwan time)08:30-17:30

Except for Sat, Sun, and Holidays

Features

  • Minimal change in adhesive strength following application ensures easy peeling.
  • Excellent leaving minimal adhesive residue.
  • Capable of tracking during drawing and bending processes, thus preventing damage to metal surfaces.

Properties

Product No. Thickness [mm]*1 Adhesive strength[N/20mm] *2
SPV-301 0.11 2.50
SPV-302 0.12 2.20

[Remarks]

  • *SPV302 has stronger lamination than SPV-301 for rough surface, such as DF.
  • *1:Nominal thickness

[Test method]

  • *2:Peeling angle: 180°, Peeling speed: 300mm/min

Applications

  • Surface protective for stainless steel plates and aluminum plates during transportation and processing.

Precautions

  • Avoid sunlight and store at room temperature and moderate humidity.
  • Do not press too strong when applying. This may cause the end of the tape to peel.
  • If applying to surfaces treated with machining oil, degrease the surface carefully. Any remains will be a cause for surface contamination or adhesive residue.
  • For use under severe conditions, please test and evaluate the product thoroughly beforehand.
  • Painting, plating, etching, or gluing the surface after peeling the tape may be troublesome due to the small amount of residue of the adhesive. Please inspect under actual situations thoroughly before application.
  • Painting, plating, etching, or gluing the surface after peeling the tape may be troublesome due to the small amount of residue of the adhesive. Please inspect under actual situations thoroughly before application.
  • Surface treated boards such as alumite, depending on treatment conditions, may show different properties (peeling) of SPV. Please evaluate thoroughly beforehand.
  • Especially for applications against natural substrate (marble stone, lumber, etc.) please contact our sales representative in charge.
  • Please note that the surface of the adherend may repel paint or exhibit poor paint adhesion after SPV-301/302 is peeled off.
  • When you paint after peeling off the surface protective material, be sure to check the surface washing, pretreatment, or paint baking conditions to ensure the paint adhesion before usage.

  • The above datasheet is a sample observation value under certain testing conditions, not guaranteed performance.
  • The quality, performance, and/or functions of this product will differ according to the conditions of use. Please contact our department in charge for full details of this product.
  • Under severe conditions, this product may show difference between the sample observed values and the actual performance. Please test and evaluate the product thoroughly for your safety and better results.
  • This product and/or its features may change or be discontinued without any prior notice.
  • The intellectual property rights of this document belongs to Nitto Denko Corporation. Please contact our department in charge for usage not in accordance of the intended use. Copying and/or reproducing the document without notice are strictly prohibited. All rights reserved.

Contact Us

Business Hours(Taiwan time)08:30-17:30(Except for Sat, Sun, and Holidays)

Adobe Reader Download

Adobe Reader is required to view PDF files.
If not yet installed, please download it from the Adobe website.

Back to Page Top