Skip to Main text

Surface Protective Materials E-MASK® R/HR Series

Low contamination type developed for surface protective of electronic and optical parts.

E-MASK® Series and HR Series are polyethylene-based surface protective materials developed utilizing Nitto Denko’s proprietary adhesive synthesis technologies. Both series are especially suitable for surface protective of LCD polarizing films, hard-coat or non-glare treated acrylic plates, and polyester films during processing and transportation.
Contact Us
  • TEL +886-2-2503-2504

Business Hours(Taiwan time)08:30-17:30

Except for Sat, Sun, and Holidays


  • Minimal change in adhesive strength following application ensures easy peeling.
  • Superior transparency enables inspection of the surface condition of the substrate without removing the tape.
  • Tape is pressure sensitive, and easily applied with a laminator.


Item Thickness [mm] *1 Adhesive strength [N/20mm] *2
E-MASK® R-50EP 0.060 0.10
E-MASK® R-100 0.065 0.30
E-MASK® R-200 0.065 0.50
E-MASK® R-300 0.070 0.80
E-MASK® HR-6010 0.063 0.50
E-MASK® HR-6030 0.070 0.90

[Test method]

  • *1: Nominal thickness
  • *2: Adherent: Acrylic plate


  • Surface protective for optical film, such as polarizing film (e.g. during LCD shipping)


  • Avoid sunlight and store at room temperature and moderate humidity.
  • Do not press too strong when applying. This may cause the end of the tape to peel.
  • If applying to surfaces treated with machining oil, degrease the surface carefully. Any remains will be a cause for surface contamination or adhesive residue.
  • For use under severe conditions, please test and evaluate the product thoroughly beforehand.
  • Painting, plating, etching, or gluing the surface after peeling the tape may be troublesome due to the small amount of residue of the adhesive. Please inspect under actual situations thoroughly before application.
  • Painted boards, depending on conditions such as paint baking, may cause the tape to peel uneasily or peel off the paint together. Please evaluate thoroughly beforehand.
  • Surface treated boards such as alumite, depending on treatment conditions, may show different properties (peeling) of SPV. Please evaluate thoroughly beforehand.
  • Especially for applications against natural substrate (marble stone, lumber, etc) please contact our sales representative in charge.

  • The above datasheet is a sample observation value under certain testing conditions, not guaranteed performance.
  • The quality, performance, and/or functions of this product will differ according to the conditions of use. Please contact our department in charge for full details of this product.
  • Under severe conditions, this product may show difference between the sample observed values and the actual performance. Please test and evaluate the product thoroughly for your safety and better results.
  • This product and/or its features may change or be discontinued without any prior notice.
  • The intellectual property rights of this document belongs to Nitto Denko Corporation. Please contact our department in charge for usage not in accordance of the intended use. Copying and/or reproducing the document without notice are strictly prohibited. All rights reserved.

Contact Us

Business Hours(Taiwan time)08:30-17:30(Except for Sat, Sun, and Holidays)

  • TEL+886-2-2503-2504

Back to Page Top