Skip to Main text

Double sided, Silicone-free Tape with Excellent Function of Die-cutting Process DSP1220(60)

The DSP1220 (60) double sided tape features low outgas and a silicone-free carrier.

Its release liner uses a silicone-free release agent, so the amount of siloxane gas generated is under the measurement limit.
Contact Us

Business Hours(Taiwan time)08:30-17:30

Except for Sat, Sun, and Holidays

Features

  • A double sided tape with low outgassing.
  • Its release liner uses a silicone-free release agent, so the amount of siloxane gas generated is under the measurement limit.
  • There is very little blocking when the tape goes through die-cutting, and it is very processable/workable when cutting off edges etc.
  • Features excellent repulsion resistance.
  • Does not contain RoHS directive 6 restricted substances.

Properties

Outgas

Unit µg/cm²

DSP1220(60)
Outgas qty. 0.3
  • Equipment: GC/MS
  • Heating conditions: 120℃ x 10min
  • Sampling method: Purge and trap headspace analysis
  • Measurement standard: n-Decane

Siloxane gas

Unit ng/cm²

DSP1220(60)
Siloxane gas qty. <0.4
  • Equipment: GC/MS
  • Heating conditions: 120℃ x 10min
  • Sampling method: Purge and trap headspace analysis
  • Measurement standard: D3-D6

Applications

  • For fixing stopping film to HDD housing.
  • For FPC and HDD spindle motor fixing.
  • For fixing film or metallic foil to electronic devices or parts.

Precautions

[Usage Precautions]

  • Make sure to remove any oils, moisture, dust, etc. from the substrate.
  • As this is a pressure-sensitive adhesive, make sure to apply ample pressure after attachment.
  • Make sure to smooth out uneven or rough surfaces as much as possible.
  • There are some materials difficult to attach to, such as rubber, polypropylene, and polyethylene. Please check this before use.
  • A minimum temperature of 10℃ is suitable for attachment. (Initial adhesive strength is reduced at temperatures lower than 10℃ in the winter months, etc.)
  • It takes a little time for the tape's original adhesive strength to take full effect, so avoid placing or using the tape in a situation in which a lot of strength is needed until several hours have passed from the time of attachment.
  • Do not touch the tape with bare hands once removed from the wrapping.
  • When using this product, please avoid contact with materials or tools containing silicone oil, machining oil, or release agents for rolling or metal molds.

[Storage Precautions]

  • Make sure to store this product in a box.
  • Avoid storing in high-temperature or high-moisture areas. This product should be stored in a cool, dark area away from direct sunlight (at a temperature of no more than 25℃).
  • Please use this tape within 6 months of storage.

[Safety Precautions]

  • Take a careful consideration if this product is adapted to the use, purpose and condition before using. The tape may peel in some cases depending on substrate and attachment conditions.
  • When using this product in areas that may pose a risk of accident, use together with a different joining method.

Contact Us

Business Hours(Taiwan time)08:30-17:30(Except for Sat, Sun, and Holidays)

Back to Page Top