Skip to Main text
Length measurement (threshold adjustment) is to measure the amount of light transmitted through the label using the sensor and to store this information on the printer.
When the label is used for the first time, and each time the label is changed, the label must be measured.
(This is an example of interruptive-type sensor 1. Please adjust the measurement method according to the sensor type.)
Set the printer’s main panel to Label Set Mode (Editing) and display [Interruptive-type sensor 1].
Press the [SET］ button.
Turn the dial to [Automatic] and press the [SET] button.
If the label pitch (P) satisfies the following equation, label error or skipping may occur.
If the label used matches these figures, change the sensor to be used.
Check the sensor position and sensor cover’s condition. If the sensor cover is dirty, clean the cover with cleaning agents such as isopropyl alcohol (IPA).
Customer Support Center
Business Hours(Turkey time)08:30-17:30(Except for Sat, Sun, and Holidays)
Back to Page Top