Skip to Main text

Surface Protective Materials SPV-ME-401/ME-4001

Environment-friendly surface protective materials suitable for bending.

SPV-ME-401/ME-4001 are environment-friendly surface protective materials developed for stainless steel and other plates that do not use polyvinyl chloride as a base material. The bending processability of these products is superior to that of existing polyvinyl chloride surface protective films by using special polyethylene film as a base material.
Contact Us

Customer Support Center

  • TEL +65-6879-3811
  • FAX +65-6274-7432

Business Hours(Singapore time)08:30 to 17:30

Except Sat, Sun & Public Holidays


  • Almost no chlorine type of gas from polyvinyl chloride films produced when incinerated.
  • Excellent application throughout the year.
  • Applicable for bending processability.


Product No. Thickness [mm]*1 Adhesive strength[N/20mm] *2
SPV-ME-401 0.12 3.00
SPV-ME-4001 0.100 3.40

[Test method]

  • *1:Nominal thickness
  • *2:Peeling angle: 180°, Peeling speed: 300mm/min


  • Surface protective for stainless steel and aluminum plates during transportation and processing.


  • Avoid sunlight and store at room temperature and moderate humidity.
  • Do not press too strong when applying. This may cause the end of the tape to peel.
  • If applying to surfaces treated with machining oil, degrease the surface carefully. Any remains will be a cause for surface contamination or adhesive residue.
  • For use under severe conditions, please test and evaluate the product thoroughly beforehand.
  • Painting, plating, etching, or gluing the surface after peeling the tape may be troublesome due to the small amount of residue of the adhesive. Please inspect under actual situations thoroughly before application.
  • Painted boards, depending on conditions such as paint baking, may cause the tape to peel uneasily or peel off the paint together. Please evaluate thoroughly beforehand.
  • Surface treated boards such as alumite, depending on treatment conditions, may show different properties (peeling) of SPV. Please evaluate thoroughly beforehand.
  • Especially for applications against natural substrate (marble stone, lumber, etc.) please contact our sales representative in charge.

  • The above datasheet is a sample observation value under certain testing conditions, not guaranteed performance.
  • The quality, performance, and/or functions of this product will differ according to the conditions of use. Please contact our department in charge for full details of this product.
  • Under severe conditions, this product may show difference between the sample observed values and the actual performance. Please test and evaluate the product thoroughly for your safety and better results.
  • This product and/or its features may change or be discontinued without any prior notice.
  • The intellectual property rights of this document belongs to Nitto Denko Corporation. Please contact our department in charge for usage not in accordance of the intended use. Copying and/or reproducing the document without notice are strictly prohibited. All rights reserved.

Contact Us

Customer Support Center

Business Hours(Singapore time)08:30 to 17:30 (Except Sat, Sun & Public Holidays)

  • TEL +65-6879-3811
  • FAX +65-6274-7432
Adobe Reader Download

Adobe Reader is required to view PDF files.
If not yet installed, please download it from the Adobe website.

Back to Page Top