NITTO DENKO/ E-MASK RP300/RP301

HOME > Product Information > Product Data Sheet / Surface protective materials for electronics/optical elements <antistatic type> E-MASK RP300/RP301

Product Information

Surface protective materials for electronics/optical elements <antistatic type>

E-MASK RP300/RP301

Static-free surface protective materials for optical films available for visual test without removing the tape.

Outline

E-MASK RP300/RP301 is an antistatic surface protective materials for optical films manufactured in a clean environment using PET film base material.

Features


•	Removal of the tape is not required for visual inspection as the tape is transparent.
•	Moderate wettability makes it easy to reapply.
•	Easy to remove the adhesive on the back of protective material.(RP300)
•	Stamp ink-jet printing is available on the back of protective material.(RP301)

Application


•	Surface protective of deflecting plates.

General properties

[Test method]
*1:Nominal thickness
*2:Based on JIS Z-0237
Adherent: Acrylic plate, Tensile speed: 300mm/min, Peeling angle: 180°

Precautions

•	Avoid sunlight and store at room temperature and moderate humidity.
•	Do not press too strong when applying. This may cause the end of the tape to peel.
•	If applying to surfaces treated with machining oil, degrease the surface carefully. Any remains will be a cause for surface contamination or adhesive residue.
•	For use under severe conditions, please test and evaluate the product thoroughly beforehand.
•	Painting, plating, etching, or gluing the surface after peeling the tape may be troublesome due to the small amount of residue of the adhesive. Please inspect under actual situations thoroughly before application.
•	Painted boards, depending on conditions such as paint baking, may cause the tape to peel uneasily or peel off the paint together. Please evaluate thoroughly beforehand.
•	Surface treated boards such as alumite, depending on treatment conditions, may show different properties (peeling) of SPV. Please evaluate thoroughly beforehand.
•	Especially for applications against natural substrate (marble stone, lumber, et al.) please contact our sales representative in charge.

•	The above datasheet is a sample observation value under certain testing conditions, not guaranteed performance.
•	The quality, performance, and/or functions of this product will differ according to the conditions of use. Please contact our department in charge for full details of this product.
•	Under severe conditions, this product may show difference between the sample observed values and the actual performance. Please test and evaluate the product thoroughly for your safety and better results.
•	This product and/or its features may change or be discontinued without any prior notice.
•	The intellectual property rights of this document belongs to Nitto Denko Corporation. Please contact our department in charge for usage not in accordance of the intended use. Copying and/or reproducing the document without notice are strictly prohibited. All rights reserved.