Main Menu
- HOME
- Product Information
- Optical Products
- Surface Protective Materials for Electronics/ Optical Elements (Antistatic Type) E-MASK® RP Series
Surface Protective Materials for Electronics/
Optical Elements (Antistatic Type) E-MASK® RP Series
Optical Grade Protective Material with an Antistatic Property Produced in a Class 1000 Clean Environment.
Outline
E-MASK RP Series for the surface protective of optical grade protective film with an antistatic property uses a polyester film as a base material and was produced in a class 1000 clean environment.
Features
- Superior transparency enables inspection of outer appearance of optical film without removing the tape.
- Offers good wettability for optical films and outstanding reapplication properties.
- High resistance to dust on the backing and ease of wiping dust off (RP300).
- Backing printable with stamp or ink jet printer (/RP301).
Application
- Surface protective of deflecting plates.
General properties
| Item | Thickness[mm]*1 | Adhesive strength[N/20mm]*2 |
|---|---|---|
| E-MASK® RP300 | 0.061 | 0.25 |
| E-MASK® RP301 | 0.059 |
[Test method]
*1:Nominal thickness
*2:Based on JIS Z-0237
Adherent: Acrylic plate, Tensile speed: 300mm/min, Peeling angle: 180°
*1:Nominal thickness
*2:Based on JIS Z-0237
Adherent: Acrylic plate, Tensile speed: 300mm/min, Peeling angle: 180°
Precautions
- Avoid sunlight and store at room temperature and moderate humidity.
- Do not press too strong when applying. This may cause the end of the tape to peel.
- If applying to surfaces treated with machining oil, degrease the surface carefully. Any remains will be a cause for surface contamination or adhesive residue.
- For use under severe conditions, please test and evaluate the product thoroughly beforehand.
- Painting, plating, etching, or gluing the surface after peeling the tape may be troublesome due to the small amount of residue of the adhesive. Please inspect under actual situations thoroughly before application.
- Painted boards, depending on conditions such as paint baking, may cause the tape to peel uneasily or peel off the paint together. Please evaluate thoroughly beforehand.
- Surface treated boards such as alumite, depending on treatment conditions, may show different properties (peeling) of SPV. Please evaluate thoroughly beforehand.
- Especially for applications against natural substrate (marble stone, lumber, ｅｔｃ) please contact our sales representative in charge.
- The above datasheet is a sample observation value under certain testing conditions, not guaranteed performance.
- The quality, performance, and/or functions of this product will differ according to the conditions of use. Please contact our department in charge for full details of this product.
- Under severe conditions, this product may show difference between the sample observed values and the actual performance. Please test and evaluate the product thoroughly for your safety and better results.
- This product and/or its features may change or be discontinued without any prior notice.
- The intellectual property rights of this document belongs to Nitto Denko Corporation. Please contact our department in charge for usage not in accordance of the intended use. Copying and/or reproducing the document without notice are strictly prohibited. All rights reserved.
