|
|
 |
 |
| Polyester substrate nonskid tape for flat and slippery surfaces. Prevents accidents on stairs, slopes, and other hazardous sites. |

 |
 |
Outline |
|
 |
| Apply to slippery surfaces outdoors. Excellent durability for long-lasting nonskid effect. |
 |
 |
 |
Structure |
|
 |
Standard specification |
|

| Thickness (mm) |
Width (mm) x Length (m) |
Qty (rolls) |
Color |
| 1.0 |
50×5 |
12 |
Green, Black, Yellow |
| 100×5 |
6 |
Green, Black, Yellow |
| 400×5 |
2 |
Black, Yellow |
|
* Please contact our sales representative for other sizes.
 |
Typical properties |
|

| Adhesive strength (stainless steel board)(N/20mm) |
Tensile strength(N/20mm) |
| 19.0 |
180 |
|
 |
Application |
|
|
| For staircases, slopes and other slippery areas in factories and stations. |
|
 |
Directions |
|
 |
 |
 |
 |
 |
 |
|
 |
 |
Flatten the surface and remove any water, oil, or dust. For heavy traffic areas, use a primer in combination. |
|
 |
Use markers for broad areas and plan out how much tape is needed.
|
 |
 |
|
|
 |
Position the tape, slowly peel the separator (release paper), and apply pressure with a roller or rubber hammer.
|
|
|
|
| (Scissors are not recommended. Use a craft knife on the adhesive side and crack it apart.) |
| Tips |
| |
Use chloroprene-rubber primer for cement surfaces. |
| |
Trim the corners of tape to prevent peeling. |
|
 |
|
 |
|
|