SPV-ME-401/ME-4001 are environment-friendly surface protective materials developed for stainless steel and other plates that do not use polyvinyl chloride as a base material. The bending processability of these products is superior to that of existing polyvinyl chloride surface protective films by using special polyethylene film as a base material.
Customer Support Center
Business Hours(India time)08:30-17:00
Except for Second Sat of each month, Sun, and Holidays
Almost no chlorine type of gas from polyvinyl chloride films produced when incinerated.
Excellent application throughout the year.
Applicable for bending processability.
Adhesive strength[N/20mm] *2
*2:Peeling angle: 180°, Peeling speed: 300mm/min
Surface protective for stainless steel and aluminum plates during transportation and processing.
Avoid sunlight and store at room temperature and moderate humidity.
Do not press too strong when applying. This may cause the end of the tape to peel.
If applying to surfaces treated with machining oil, degrease the surface carefully. Any remains will be a cause for surface contamination or adhesive residue.
For use under severe conditions, please test and evaluate the product thoroughly beforehand.
Painting, plating, etching, or gluing the surface after peeling the tape may be troublesome due to the small amount of residue of the adhesive. Please inspect under actual situations thoroughly before application.
Painted boards, depending on conditions such as paint baking, may cause the tape to peel uneasily or peel off the paint together. Please evaluate thoroughly beforehand.
Surface treated boards such as alumite, depending on treatment conditions, may show different properties (peeling) of SPV. Please evaluate thoroughly beforehand.
Especially for applications against natural substrate (marble stone, lumber, etc.) please contact our sales representative in charge.
The above datasheet is a sample observation value under certain testing conditions, not guaranteed performance.
The quality, performance, and/or functions of this product will differ according to the conditions of use. Please contact our department in charge for full details of this product.
Under severe conditions, this product may show difference between the sample observed values and the actual performance. Please test and evaluate the product thoroughly for your safety and better results.
This product and/or its features may change or be discontinued without any prior notice.
The intellectual property rights of this document belongs to Nitto Denko Corporation. Please contact our department in charge for usage not in accordance of the intended use. Copying and/or reproducing the document without notice are strictly prohibited. All rights reserved.